Atlantis Deepwater Tecnology Holding AS
Atlantis Deepwater Tecnology Holding AS
Front pageThe CompanyThe Atlantis SystemContact UsNewsAtlantis Deepwater Tecnology Holding AS
Explorer
Producer
Tower
Development
-First well
-Towing and handling
-Manufacturing

THE ABS MANUFACTURING

Below is shown the ABS manufacturing story from the end first and then followed by less and less completed.

Atlantis Deepwater Tecnology Holding AS Atlantis Deepwater Tecnology Holding AS
31.03.03 31.03.03
Atlantis Deepwater Tecnology Holding AS
31.03.03
Fabrication of the first full scale Atlantis unit has now been completed at the Nymo Yard in Grimstad, Norway, and the unit has been transported to Stavanger.
14.03.2003
Atlantis Deepwater Tecnology Holding AS Atlantis Deepwater Tecnology Holding AS

Atlantis Deepwater Tecnology Holding AS Atlantis Deepwater Tecnology Holding AS

 

Fabrication of Atlantis prototype unit

10.01.03
Atlantis Deepwater Tecnology Holding AS Atlantis Deepwater Tecnology Holding AS

 

Atlantis Deepwater Tecnology Holding AS


Status 30.09.02 

Atlantis Deepwater Tecnology Holding AS Atlantis Deepwater Tecnology Holding AS
Top view showing the support structure for the BOP/ Details of the support structure
for the BOP / wellhead wellhead being installedand housing for the ROV equipment

Atlantis Deepwater Tecnology Holding AS
 Side view
 


Status 19.08.02
Atlantis Deepwater Tecnology Holding AS Atlantis Deepwater Tecnology Holding AS

 

The pictures show the eight compartments with bulkhead and some of the skin plates,
7.2 meters high and 16 meters in diameter.

 
Status 23.07.02 
 Atlantis Deepwater Tecnology Holding AS Atlantis Deepwater Tecnology Holding AS
Center cone, Atlantis prototype unit  Lower part of Atlantis prototype unit,
Diameter 6.5 metersOuter diameter 16 meters

 
Atlantis Deepwater Tecnology Holding AS
Front page Løsning for deg